If you’re an ATV enthusiast, then you know that tires are one of the most important parts of your vehicle. They need to be in good condition if you want to enjoy a safe and smooth ride.
If your tires start to wear out, it’s time for a new set. But where do you go to get them mounted?
You can get your ATV tires mounted at a few different places. You can either go to a professional tire shop or do it yourself. If you’re uncomfortable doing it yourself, taking it to a professional is probably your best bet.
- Where To Get Your ATV Tires Mounted
- How To Mount ATV Tires Yourself
- Step by Step Guide on Mounting ATV Tires
- Benefits of Mounting Your Own Tires
- Tips To Keep Your Tires in Good Condition
- ATV Tire Mounting FAQs
- Final Thoughts
Where To Get Your ATV Tires Mounted
Here are the best options when you want to get your tires mounted:
The professionals at a tire shop will have the tools and expertise to get the job done quickly and efficiently. They can also advise which tires are best for your ATV based on your driving habits and the terrain you’ll be riding on.
However, tire shops can be expensive, and you might have to wait a while for your tires to be mounted.
Do It Yourself
Mounting your tires can be tricky, but it’s doable if you’re comfortable with a few tools. You’ll need to make sure that you have the right tools and know how to use them properly.
It’s also important to know which tires are best for your ATV. But if you’re up for the challenge, mounting your tires can save you time and money.
How To Mount ATV Tires Yourself
Before I get into how to mount your own ATV tires, let me first say that you should only attempt this if you’re comfortable with a few tools. If you’re not, then I recommend taking it to a professional.
Now, let’s get started. You’ll need the following tools:
This tool is used to break the bead seal on your tire so that you can remove it from the wheel. Bead breakers are made to pry the bead down and away from the rim.
A tire bead can become “frozen” to the rim over time, which makes removal difficult and time-consuming. You have the necessary leverage when using the correct tool.
A tire iron is a long, thin metal rod with a J-shaped hook on one end. The other end is usually flat. You’ll use the tire iron to pry the tire’s bead over the wheel’s rim.
You’ll need two tire irons for this job: one to hold the bead in place while you use the other to pry the bead over the rim.
A bead holder is a tool that holds the tire’s bead in place while you’re mounting the tire. This prevents the bead from slipping off of the wheel during the process.
Manual Tire Changer
A manual tire changer is the best approach to get everything you require in one unit. It includes bead breakers and pry bars.
Additionally, you may mount your rim on it as an anchor point.
Soap and Water
You’ll need soap and water to lubricate the tire’s bead, so it slides easily over the rim.
Step by Step Guide on Mounting ATV Tires
Now that you have the necessary tools, it’s time to start. Here’s how to mount your own ATV tires:
Step 1: Break the Bead Seal
The first step is to break the bead seal on your tire. To do this:
- Deflate the tire
- Slip the scooped end of your breaker bar under the lip of the tire
- Lever the bead down and away from the rim
- Repeat this process around the tire until it falls away easily
Step 2: Remove the Tire from The Wheel
Once you’ve broken the bead seal, you can remove the tire from the wheel. To do this:
- Spray a soapy solution on the bead of your tire. This will help the tire slide over the rim.
- Pry the tire and rim apart using the flat end of your pry bar.
- Pull the tire over the rim by prying it up. Remember that one way may be simpler to remove the tire than the other due to the shape of particular rims.
- Pry up as you go and move around the tire. You can use a second pry bar to keep the tire from slipping back under the rim.
- The other bead should come up without difficulty after the top of the tire is over the rim.
Step 3: Clean Rim Lip and Apply Sealer
Now that the tire is off the wheel, it’s time to clean the rim lip and apply sealer. To do this:
- Use a brush or compressed air to clean any dirt or debris from the rim.
- Apply a bead of sealant around the entire circumference of the rim. This will help keep your tire in place while you’re mounting it.
Step 4: Mount the Tire On The Wheel
Now you’re ready to mount the tire on the wheel. To do this:
- Place the wheel on your bead holder and ensure it’s secure.
- Lubricate the bead of your tire with soap and water. This will help the tire slide over the rim.
- Pry your tire’s bead over the lip of the wheel using your pry bar.
- Work your way around the tire until both beads are seated on the rim.
- Inflate your tire to its recommended pressure.
Step 5: Check the Tire Pressure and Balance
The final step is to check the tire pressure and balance. To do this:
- Check the tire pressure with a gauge to ensure it’s at the correct level.
- Use a balancing machine to spin the wheel and check for any imbalances. If there are any, add weight to the appropriate area of the wheel until it’s balanced.
Benefits of Mounting Your Own Tires
There are a few benefits of mounting your own tires:
Professional tire mounting can be expensive, especially if you have a lot of tires to mount. Mounting your own tires saves you the money of paying for professional services.
It can take professionals hours to mount a set of tires. Mounting them yourself takes significantly less time, so you can get back on the trails sooner.
Great Way to Learn
If you’re the type who likes to learn how to do things yourself, mounting your tires is a great way to learn. You’ll better understand how they work and how to care for them properly.
Plus, it’s a satisfying feeling knowing you did it yourself.
Tips To Keep Your Tires in Good Condition
Here are a few tips to keep your tires in good condition:
- Check the air pressure regularly. Tires with too much or too little air can be damaged easily.
- Inspect your tires before each ride for any signs of damage, such as cracks or punctures. If you see any damage, replace the tire immediately.
- Avoid riding over sharp objects, such as rocks or logs. These can puncture your tires and cause a flat.
- Clean your tires after each ride to remove any mud or debris that may be stuck in the treads.
ATV Tire Mounting FAQs
How much can it cost to get ATV tires mounted professionally?
Mounting them professionally can cost anywhere from $20 to $60 per tire. The price will depend on the type of tire, the size, and the location.
How long does it take to mount an ATV tire?
Mounting an ATV tire can take anywhere from 30 minutes to an hour. The time will depend on the type of tire, the size, and the location.
Is it hard to mount ATV tires?
It can be difficult to mount ATV tires if you’ve never done it before. It’s important to be careful when prying the tire onto the wheel so that you don’t damage either one.
It’s also important to make sure the wheel is secure before you start. Once you’ve done it a few times, it’ll get easier.
Should I mount my own ATV tires?
It’s up to you whether or not you want to mount your own ATV tires. If you’re the type of person who likes to learn how to do things yourself, it can be a great way to save money and learn something new.
Just make sure you’re being careful and take your time.
Do ATV tires need to be balanced?
Yes, ATV tires need to be balanced. This can be done by a professional or by using a balancing machine.
Balancing your tires will help extend their life and improve their performance.
How often should I check my ATV tire pressure?
You should check your ATV tire pressure at least once a month. Checking it more often is even better, especially if you’re using your ATV regularly.
You can get your ATV tires mounted professionally or do it yourself. If you decide to do it yourself, make sure you’re being careful and take your time.
It’s also important to regularly check your tires’ pressure and balance. Following these tips will help extend the life of your tires and keep them in good condition. Thanks for reading.
Please be careful and use at your own risk
None of the authors, contributors, administrators, or anyone else connected with RCRideOnCars.com, in any way whatsoever, can be responsible for your use of the information contained in or linked from these web pages.
Kevinsmak is a content producer of RC Ride On Cars. He always works with his testers to find the best Power Wheels for families everywhere. His mission is to ensure people get the most appropriate ride-on car for their children so they can drive all day safely.