How to Remove Rear Wheel on Go Kart in 7 Steps

  • By: Kevinsmak
  • Date: January 12, 2023
  • Time to read: 7 min.
Affiliate Disclaimer

As an affiliate, we earn from qualifying purchases. We get commissions for purchases made through links in this post.

To remove the rear wheel of a go-kart:

  • Park the Kart on a Level Surface
  • Gather Your Tools
  • Loosen the Chain or Belt
  • Jack Up the Kart
  • Remove the Nuts or Bolts
  • Remove the Rear Wheel
  • Clean Up and Inspect the Rear Wheel

Removing the rear wheel on a go-kart can be a daunting task if you have never done it before. It is important to know how to do it properly so that you don’t damage the Kart or yourself.

In this blog post, we will walk you through the 7 steps necessary to remove the rear wheel on a go-kart safely and efficiently. Let’s get started!

Why Is Harder to Remove the Rear Wheel of a Go Kart

Removing the back wheel of your go-kart could be more challenging than you expect for a few different reasons. Some of them are listed below.

The Rear Wheels are Often Bigger and Heavier

The rear and front wheels of go-karts are often not the same sizes. It frequently happens that the rear wheels are bigger and heavier than the front ones.

They have to support the weight of the engine and the driver, which is why. The back wheel may therefore be a little more challenging to lift and move.

There is a Chain or Belt Attached to the Rear Wheel

The back wheel frequently has a chain or belt linked to it, which is another factor that might make removal more difficult. This contributes to the go-kart’s power.
Therefore, when removing the wheel, you must be careful not to harm the chain or belt.

The Rear Wheels Have More Torque

Additionally, the torque is higher on the back wheels than on the front ones. This is due to the fact that a chain or belt connects them to the engine.

Therefore, it could be more difficult to sever the connection between the wheel and the engine when you remove the rear wheel.

The rear axle is usually located closer to the ground than the front axle

Because the engine is mounted behind the rear wheels, the vehicle tends to pull to the left. So, it may be more challenging to acquire an adequate clearance to remove the wheel when jacking up the back of the go-kart.

The Rear Wheels Often Seize Onto the Axle

I don’t know if it’s just me or if this happens to everyone, but the rear wheels on my go-kart always seem to seize onto the axle. I’m not sure why this is, but it makes removing the rear wheel even harder.

When a rear-wheel seizes onto the axle, you may find it impossible to remove without damaging the wheel or the axle. I am, shower going to tell you how to do it in a moment.

7 Steps on How to Remove Rear Wheel on a Go Kart

We’ve covered why it’s more challenging to take off the back wheel; now, let’s go over the procedure for doing so. If this is something you have never done before, it’s best to get some assistance.

Step 1: Park the Kart on a Level Surface

Place the kart on a flat surface as the initial step. Since the kart can’t roll away while you’re working on it, this will make removing the back wheel much simpler.

Before beginning any kart maintenance, you should ensure it is secure.

Step 2: Gather Your Tools

Next, you will need to gather your tools. You will need a jack, a wrench, and something to place under the kart to prevent it from rolling away.

You may also need a hammer to help loosen the wheel if it seizes onto the axle.

Step 3: Loosen the Chain or Belt

First, you’ll need to unfasten the belt or chain that’s keeping the back tire from spinning. A wrench is required for this task.

When letting the chain or belt out, take caution not to break it.

Step 4: Jack Up the Kart

Raising the kart’s suspension is the next step. This is necessary so that you have room to remove the back tire.

Start by positioning the jack under the kart and making sure it is secure. Find a sturdy metal area of the chassis to secure the jack in.

Lift the kart and secure something under it so it doesn’t roll away.

Step 5: Remove the Nuts or Bolts

Next, loosen the bolts or nuts attaching the axle to the back wheel. In order to accomplish this, you will need a wrench.

Take care not to lose any of the nuts or bolts, as it may be difficult to track them down if they roll away.

You can whack the wrench with a hammer if the nuts are too tight or otherwise impossible to loosen. It will help them relax this way. Take care to avoid stripping the threads on any bolts or nuts.

Add some lubricant to the threads if they’re particularly stuck.

Step 6: Remove the Rear Wheel

Once the nuts or bolts are removed, you can now remove the rear wheel from the axle. Be careful not to damage the wheel when you are removing it.

If the wheel is seized onto the axle, you may need to use a hammer to help loosen it up.

Step 7: Clean Up and Inspect the Rear Wheel

With the back wheel out of the way, a damage check is in order. It is not safe to remount the vehicle until the rear wheel has been inspected for damage and repaired or replaced if necessary.

After making sure everything looks good on the back tire, you can wipe it off to remove any dust or grime.

And that’s the whole thing! You’ve just finished dismantling the back wheel of your go-kart. Before reinstalling, check the wheel for damage and give it a good cleaning.

If you are in any way unsure about how to proceed, it is best to seek assistance.

Removing Go Kart Wheels FAQs

Final Thoughts

It can be challenging to take off a go-kart’s back wheel. However, the back wheel may be removed without incident if you follow these simple instructions.

Just make sure to check the wheel for damage and get some assistance if you need it if this is your first time. The wheel should be cleaned before being reinstalled.

Please be careful and use at your own risk
None of the authors, contributors, administrators, or anyone else connected with, in any way whatsoever, can be responsible for your use of the information contained in or linked to these web pages.